The phrase "old buffet" is associated with most people with shabby and unusable furniture, the very place of which is in a landfill. But still there are those who want to give her a second chance, since the products of those times are distinguished by high reliability and quality of the materials used.Do-it-yourself buffet restoration at home - Interesting and exciting occupation, which allows you to get unique furniture, the second of which can not be found throughout the world.
Preparing tools for a buffet restoration at home
The return to life of antique furniture will not require significant cash expenses and inaccessible materials - everything can be purchased at the nearest supermarket. For ordinary unpretentious recovery you will need:
- Solvent and sandpaper. Remains of old paint, dust and dirt will necessarily be present on the surface of old furniture, which must be eliminated without fail;
- Tools for disassembling and assembling the buffet (hammer, pliers, wrenches, screwdriver);
- New fittings, if the old is unsuitable for further use;
- Putty or wax to eliminate cracks and chips;
- Masking paper tape;
- Acrylic paint and varnish;
- Sponges and brushes of different sizes.
Tip. After removing old paint, it is recommended that you wipe all the hard-to-reach areas of the cupboard with a damp sponge to avoid dust accumulation.
Step-by-step restoration instructions
A step-by-step instruction for the restoration of the old do-it-yourself sideboard is as follows. First of all, you should disassemble the furniture - remove all the doors, accessories, glass and shelves. In case the glass cannot be removed, it is necessary to paste over it with masking tape. Thereafter:
- The old coating is removed, which is best done either outdoors or in a well-ventilated area. After that, the treated surfaces are thoroughly wiped with degreasing agents.
- Cracks, delaminations and other damages with putty are closed. Chips, broken legs are replaced with similar ones cut out of their wood or removed from similar products.
note. The completion of the preparatory work is a primer, which contributes to the easy application of paint, its rich color, and also increases the durability of the furniture.
- Two layers of paint are applied, and the painting should begin with the basic elements.
- Decorating, applying patterns of fabric or napkins, painting.
- After drying, the surface of the buffet is covered with two layers of varnish.
Next, you should wait for the varnish to dry and proceed to the assembly of the structure, removal of the masking tape and the final cleaning of the finished product.
How to care for restored furniture
Reconditioned furniture is undemanding - the process is no different from caring for new products. Periodically, the buffet should be wiped with a damp cloth so as not to scratch, while avoiding its location in a room with high humidity, which will significantly shorten his eyelid. The same applies to places near hot batteries, fireplaces and stoves - the painted surface will become unusable much faster.
Throwing an old buffet into a landfill is a simple task, it is much more difficult to restore it, to show imagination, not to be afraid to get dirty in the paint. In any case, both the recovery process and the final result will bring a special, incomparable pleasure and bring cosiness and a bit of a fairy tale to the interior.
Leave Your Comment