How to assemble a child seat

A baby car seat is an indispensable and indispensable thing for traveling with children. In the process of use, sooner or later it gets dirty. Of course, it can be removed, disassembled and thoroughly cleaned or washed. But in the future, the question will arise of its assembly in its original position. This process can cause some difficulties, but it must be done correctly.

How to assemble a child seat

If there is an instruction, then to carry out the correct assembly of a child seat will not be difficult. But if it is not there, it is necessary to think over the process of future assembly of the product in advance. In this process, every detail is important, the order of their installation, as well as the location.

Advice! In the process of analyzing the chair, you can take photos of his device, as well as memorize or record individual moments of fasteners.

This will greatly simplify greatly simplify the work in the future.

Assembly order

When assembling, follow the steps below.

• To begin with put on the top of the main cover. It is fixed from the back with Velcro, buttons or other mechanisms.
• Further put on seat belts and put on another part of the cover. The cover should be worn easily and quickly.
• Spread out all the folds on the cover and check that everything is properly dressed and fixed.
• Replace the soft pad.. Make sure that the holes for the belts when layering parts coincide with each other.
• Pass the main lock belt through these straps and securely fasten it with a metal clasp.
• We attach the upper soft lining. It is fixed above the lower lining opposite the holes for the shoulder straps.
• Threaded straps. And also follows wear special pads that soften frictionI.
• Thread the side straps through the shoulder straps. They are passed through the cover and the base of the structure. From the back surface they are fixed with a bracket.
• Test belt tension.
• Connect the straps that extend from the upper back to the front straps.
• Further, the chair can be installed in the car. With this snag usually does not occur.

The above diagram can be applied to most child seats.. Minor refinements may be made depending on the product model.

reference. For each model, the chair is made a cover in accordance with the features of its design. Therefore, you should not change it to another similar product.

Useful tips for assembling a child seat

• It should be understood that carry out washing and cleaning of the child seat on a regular basis. It is definitely not worth ignoring this process, because food debris, dust and dirt can be sources of many diseases and cause allergies. Therefore, it is important to learn how to quickly and correctly disassemble and assemble a chair. In the future, this can be done in five minutes.
• It should be remembered that every detail in such a device has some function and should be in its place. The principle of fastening belts in most types of products is the same. Long straps are used for the back of a child seat, and short ones are fixed on the underside.
• After both types of straps have passed through special recesses, they must necessarily intersect with each other. Then they are fixed with a buckle. It can be made of various materials. More reliable are metal fasteners.
• Each part requires careful fixing, depending on how it is installed.. It is important that in the process of movement all the parts are securely installed and not let down during the movement.

Attention! Pay attention to the location of the belts on top of the product. The shoulders of the baby should be located slightly below the holes for the shoulder straps.

To ensure the safety of the child

• It is especially important to deal with seat belt fasteners.. Their fastening at the right height in accordance with the growth of the child provides comfort, convenience and safety during the trip. On the back of the chair there are holes for threading belts. Thanks to this, it becomes possible to choose the required mounting height. There are the following consequences of improper fixing of belts.

1. High hold does not provide safety while riding by car, because the mount does not hold the child securely. This increases the risk of injuries during sudden braking.
2. A narrow installation of fasteners will put strong pressure on the baby’s body. Discomfort and severe pain from pressure on the belts may occur.

Following certain recommendations, you can assemble a child seat quite quickly. The main thing is to return the individual mechanisms of the product into place without damage, and also not to spoil the material from which the product is made.

Try to assemble the chair once, and in the future this process will occur much faster. This will make it possible to wash soft parts much more often.